OTHER PRODUCTS - Barbieri S.p.a.

Our product range includes a series of rubber sheets designed to ensure maximum wear, tear and shock resistance using compounds that withstand oils, greases, solvents, acids and high temperatures. Some of these types are normally used as SKIRT BOARD RUBBER on conveyor belts. Many of these sheets can be supplied with CS adhesive underlays for exceptional adhesion to metal surfaces or rubber to rubber.
Standard dimension: 1.500 x 10.000 mm, 1.500 x 25.000 mm, 2.000 x 10.000 mm, 2.000 x 20.000 mm. All sheets can be cut down to requested sizes.

NOMABORD®

Rubber with good wear, tear and shock resistance. Excellent for use as skirt board rubber.

SABBIATEN®

Rubber with exceptional abrasion and tear resistance, particularly suited to metal surface cover in case of even large-size sharp-edged and abrasive falling materials.

CREPBORD®

Highly elastic and soft rubber with low specific weight. Good abrasion resistance. Excellent for use as skirt board rubber.

SUPERCREPBORD®

Highly elastic and soft rubber. Used for the liming cyclones, curves and where maximum abrasion resistance by small-size materials is required.

OLEOBORD®

Rubber with excellent resistance to mineral, vegetal and animal oils and greases and to aliphatic solvents. Excellent for use as skirt board rubber.

PIROBORD®

Heat-resistant rubber. Maximum operating temperature is 150°C. Also has good resistance to highly concentrated acids. Excellent for use as skirt board rubber.

Dust-Proof

Highly elastic, soft, low specific gravity rubber. Excellent resistance to abrasion. Excellent to eliminate dust and dust build-up on any type of machine.

The operating performance of a belt conveyor system depends on its degree of cleanliness. Cleanliness is achieved by installing appropriately hard and rigid scrapers that can adapt to belt unevenness to ensure proper cleaning.

Tergibord

Scraper made of a single layer of high hardness rubber.

Tergibord/S

Scraper made of three layers of rubber. The two outer layers are harder while the inner layer is softer for greater elasticity and capacity to adapt to the belt surface.

The rotary rubber brush can be used on any type of belt. When it rotates opposite to the direction of the belt it is excellent at removing fine or dusty material or material that sticks easily to the belt.

LINERFLEX® is the ideal solution to reduce slippage between belt and drum.
In addition to preventing slippage it increases belt stability, evacuates dirt and protects the drum against wear and corrosion.
The quality of the rubber ensures excellent abrasion and shear resistance.

Sheet dimensions: 1.500 x 10.000 mm and 2.000 x 10.000 mm
LINERFLEX® are supplied with adhesive layer CS.

LINERFLEX® MINI DIAMOND

Diamond dimensions: 18 x 35 mm

LINERFLEX® BIG DIAMOND

Diamond dimensions: 35 x 60 mm

LINERFLEX® CERAMIC

Sheet dimensions: 385 x 10.000 mm
Thickness: 12 mm

Ceramic rubber, in heavy-duty working conditions and when subject to high loads, avoids excess wear caused by slippage in the presence of dust and mud.
20 x 20 mm embossed vulcanized ceramic AI203 elements are embedded in the LINERFLEX® rubber, increasing its strength characteristics.

The two-part TETAKO® adhesive is the ideal, safe and fast solution to join metal and textile conveyor belts, repair plies and covers on any type of belt and lag drums with both rubber and ceramic.

The TETAKO® adhesive can also be used in any situation where it is necessary to bond metal surfaces with rubber, rubber with fabric, rubber with rubber and fabric with fabric.

By simply mixing the pack of glue with the hardener, you obtain a product that is ready for immediate use and it is therefore possible to intervene immediately and prevent downtimes and production losses.

We can supply a set of rectangular and diamond patches, made entirely out of rubber or with a built-in textile reinforcement and CS adhesive underlay, to make cold repairs and joints on textile and metal conveyor belts.

DIAMOND PATCHES

Dimensions:
135 x 160 mm
200 x 260 mm
270 x 360 mm
450 x 470 mm

RECTANGULAR PATCHES

Dimensions:
100 x 10.000 mm
150 x 10.000 mm
220 x 10.000 mm
300 x 10.000 mm

Stainless steel 6-spike clips are used to make lengthwise repairs on conveyor belts. Coming in 100-piece boxes and in various sizes depending on the thickness of the belt to repair.

We manufacture vulcanizing presses for textile and metal conveyor belts with maximum belt widths up to 3.200 mm.

The heating plates and pressure crossbeams we use are always made of high quality aluminum. This ensures a long working life as well as excellent tensile and bending strength to our presses. They are available, on request in rectangular or diamond 16,42°, 22° shapes.

Our vulcanizing heating plates can be equipped with air or water cooling systems for rapid cool-down. Our presses are equipped with manual or automatic electric boards. Maximum specific surface pressure is approximately 140 N/cm2.

RUBBER SHEETS